Orvaldi

		LED Indicator(s)
		Line interruptible design with Boost & Buck AVR function
		Overload and Short-circuit protection
		Cold start feature (DC power on)
		Surge Protection for Phone/Modem/Internet

This UPS is specially designed for low power loads with multi-functions; WiFi Acess Points, Routers, Switches, home applications.

Its light weight, compact design perfect fits to the limited working enironment.

The line of UPS is equipped with boost and buck AVR to stabilize input voltage range.

It is also built-in with DC start function (Cold Start).

This function enables the UPS to be started up without AC power supplied.

Technické parametre

		1065SP	1075SP	1090SP
Input	Voltage Window	220/230/240VAC Nominal -25%+25%
	Frequency	50Hz or 60Hz
Inv. O/P	Waveform	PWM Simulated Sine wave
	Frequency	50Hz or 60Hz +/-1Hz
	Capacity	650VA	750VA	900VA
	Regulation	+/-3%
	Transfer Time	2ms typical; 5ms maximum
Battery	Types	Lead-Acid maintenance-free
	DC Bus	12V/7A	12V/7A	12V/9A
	Number	1 PCE	1 PCE	1PCE
	Recharge Time	Typically 8 hours to 90% charged
	Run Time	6-20 minutes depending on load connected
Protection	Over/Under Volt.	Switch to Bat. O/P when Mains over regulation range
	Overload/Short	Fuse & current limited for both mains and Eatery modes
	Low Battery	Two stages; no battery drain after cut off
	Noise Filtering	EMI/RFI full time suppression
Mechanical	Socket Type	German or French
	Socket No. (pcs)	German/French : 6 PCS
	*Dim (DWH)mm*	26017080
	Weight (kgs)	5.5	6	6.5
Warning	LED on Front	AC Nomd: Green Steadily, Backup: Yellow intermittently
Signals	Beeping Alarm	On Battery, Battery Low and Overload
Communication Port		N/A : USB
Fax/Modem/Internet Protection		N/A : RJ45
Cold Start		It enables to activate UPS without Utility Power